HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Assembling Photo Jewelry

It will take longer to select your photos than it will to assemble the final product! This is easy, you’ll be done in no time!

Remove Plastic Cover
All Memory Photo Accessories come with a protective plastic cover that has to be removed so it can be reinstalled later.

The cover can be easily removed using a high tech tool, a straigthened paper clip! Depending on your style, push the paper clip through a hole in the back of the frame or side of the charm to pop out the cover.


Cutting Out and Installing Your Photos
Trim your mini photo so that no white border remains.

Place the picture in the frame, starting with two corners, making sure that the picture’s corners are securely positioned under the corner tabs or decorative edges. Then bend the paper slightly so it will slip into the bottom half on the mini Memory Maker frame.


Replace the Plastic Cover
Replace the plastic cover by inserting two corners first as shown.

Push slightly towards the inserted corners so the plastic will slightly bow. The remaining two corners will snap into place easily.


Congratulations, you are on the way to creating a piece of photo jewelry that is uniquely yours! That was almost easier than eating chocolate. Ok, not really.